User Manual For Sony Car Stereo Model Mex-gs610bt
Posted on by admin
More User Manuals for Sony MEX-GS610BT. 1 MEX-GS610BT Operating Instruction in English,French 64 Pages 1.1 Mb; 2 MEX-GS610BT Installation Guide in English,German,French,Italian,Dutch 2 Pages 233.7 Kb; 3 MEX-GS610BT Operating Instruction in English,German,French,Italian,Dutch 144 Pages 2.2 Mb.
Sony MEX-N5000BT Operating Instructions. Download Operating instructions manual of Sony MEX-GS610BT Car Receiver, Stereo System for Free or View it Online on All-Guides.com. Audio manuals and audio service pdf instructions. Find the user manual you need for your audio device and more at ManualsOnline. Free Sony Stereo System User Manuals ManualsOnline.com.
It’s a relationship we hope to grow in the future with more games!”“We looked at every major technology out there and CRYENGINE suits our needs perfectly.”. Reviews“CRYENGINE is, for my money, the best looking and most full-featured engine currently available.”“It’s safe to say we literally could not have done this game with any other engine without a drastic reduction in the scope of our project; the size of our maps, the level of detail. Cryengine 5 manual engine download. We set out to make a world that was breathtaking to look at, and that’s what you see in-game.
Epson WorkForce WF-3640 Pdf User Manuals. View online or download Epson WorkForce WF-3640 User Manual, Specification Sheet. Manuals and User Guides for Epson WorkForce WF-3640. We have 6 Epson WorkForce WF-3640 manuals available for free PDF download: User Manual, Administrator's Manual, Quick Manual. Model Name Or IP Address Not. Contents WF-3620/WF-3640 User's Guide. Home Support Printers All-In-Ones WorkForce Series Epson WorkForce WF-3640. Learn more about an important security update for this product. Epson WorkForce WF-3640. Manuals and Warranty. Start Here - Installation Guide PDF. To contact Epson America, you may write to 3840 Kilroy Airport Way, Long Beach, CA 90806 or call 1-800-463-7766. Epson model wf 3640 user's manual.
Read Sony MEX-GS610BE / MEX-GS610BT / MEX-N6050BT Service Manual online
Sony Corporation
(MEX-N6050BT)
(MEX-GS610BT only)
FOR THE CUSTOMERS IN THE USA. NOT
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
CEA2006 Standard
Power Output: 17 Watts RMS × 4 at 4
Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
Power Output: 17 Watts RMS × 4 at 4
Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
FM
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
Intermediate frequency:
Sensitivity: 26 μV
MEX-GS610BT
(MEX-GS610BE)
Antenna (aerial) terminal:
Intermediate frequency: 25 kHz
Selectivity: 75 dB at 400 kHz
Separation: 50 dB at 1 kHz
MW/LW
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
LW: 153 – 279 kHz
External antenna (aerial) connector
Sensitivity: MW: 26 μV, LW: 45 μV
FM1/FM2: 87.5 – 108.0 MHz
FM3: 65 – 74 MHz (at 30kHz step)
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Corresponding codec: MP3 (.mp3) and WMA (.wma)
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Corresponding codec: MP3 (.mp3) and WMA (.wma)
Interface: USB (High-speed)
Maximum current: 1 A (front), 2.1 A (rear)
The maximum number of recognizable tracks:
Maximum current: 1 A (front), 2.1 A (rear)
The maximum number of recognizable tracks:
Corresponding codec:
FM
Tuning range:
Tuning range:
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 108.0 MHz (at 100 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
87.5 – 108.0 MHz (at 100 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
50 kHz/100 kHz/200 kHz switchable
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
530 – 1,710 kHz (at 10 kHz step)
9 kHz/10 kHz switchable
External antenna (aerial) connector
9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz step)
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)
MEX-GS610BE/GS610BT/
SPECIFICATIONS
2014L33-1
2014.12
Canadian Model
E Model
Russian Model
Ver. 1.2 2014.12
CDX-G3000UE/G3000UP/
G3050UV
G3050UV
MG-101CF-188
DAX-25A
AUDIO SYSTEM
The service manual of the mechanism deck, used in
this model, has been issued in a separate volume.
Please refer to the service manual of the MG-101
series for the mechanism deck information.
this model, has been issued in a separate volume.
Please refer to the service manual of the MG-101
series for the mechanism deck information.
Photo: MEX-GS610BT
2
SiriusXM Connect Vehicle Tuner and Subscription
sold separately.
www.siriusxm.com
Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
sold separately.
www.siriusxm.com
Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is under
license. Other trademarks and trade names are
those of their respective owners.
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is under
license. Other trademarks and trade names are
those of their respective owners.
The N-Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in other
countries.
of NFC Forum, Inc. in the United States and in other
countries.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
trademark of Microsoft Corporation in the United
States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service
mark of Apple Inc.
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service
mark of Apple Inc.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
licensed from Fraunhofer IIS and Thomson.
Pandora, the Pandora logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
Google, Google Play and Android are trademarks of
Google Inc.
Google Inc.
BlackBerry® is the property of Research In Motion
Limited and is registered and/or used in the U.S.
and countries around the world. Used under license
from Research In Motion Limited.
Limited and is registered and/or used in the U.S.
and countries around the world. Used under license
from Research In Motion Limited.
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
•
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
aged by heat.
Keep the temperature of soldering iron around 270 °C during
repairing.
repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
Communication System:
Output:
Maximum communication range:
1
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*
Compatible BLUETOOTH Profiles*
:
A2DP (Advanced Audio Distribution Profile) 1.3
AVRCP (Audio Video Remote Control Profile) 1.5
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile)
SPP (Serial Port Profile)
MAP (Message Access Profile)
HID (Human Interface Device Profile)
AVRCP (Audio Video Remote Control Profile) 1.5
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile)
SPP (Serial Port Profile)
MAP (Message Access Profile)
HID (Human Interface Device Profile)
*1 The actual range will vary depending on factors such
as obstacles between devices, magnetic fields
around a microwave oven, static electricity,
reception sensitivity, antenna (aerial)’s performance,
operating system, software application, etc.
around a microwave oven, static electricity,
reception sensitivity, antenna (aerial)’s performance,
operating system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose
Power amplifier section
Output: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 55 W × 4 (at 4 ohms)
Speaker impedance: 4 – 8 ohms
Maximum power output: 55 W × 4 (at 4 ohms)
Outputs:
Audio outputs terminal (front, rear, sub)
Power antenna (aerial)/Power amplifier control
Power antenna (aerial)/Power amplifier control
Inputs:
SiriusXM input terminal
(MEX-GS610BT only)
Remote controller input terminal
Antenna (aerial) input terminal
MIC input terminal
AUX input jack (stereo mini jack)
USB port: front, rear
(MEX-GS610BT only)
Remote controller input terminal
Antenna (aerial) input terminal
MIC input terminal
AUX input jack (stereo mini jack)
USB port: front, rear
Power requirements: 12 V DC car battery (negative
Dimensions:
1
8
Mounting dimensions:
1
4
1
8
5
16
Mass: Approx. 1.2 kg (2 lb 11 oz)
Package contents:
Package contents:
Remote commander (1): RM-X231
Microphone (1)
Parts for installation and connections (1 set)
Microphone (1)
Parts for installation and connections (1 set)
Design and specifications are subject to change
without notice.
without notice.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
CAUTION
The use of optical instruments with this product will
increase eye hazard.
The use of optical instruments with this product will
increase eye hazard.
COMPONENTS IDENTIFIED BY MARK
WITH MARK
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
À LA SÉCURITÉ!
0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
3
SERVICING NOTES
SERVICING NOTES
3
................................. 16
3-1. Disassembly
.............................. 22
3-2. Mini Fuse (Blade Type) (10A/32V) (FU1), Cover ..... 22
3-3. Sub
3-3. Sub
Assy
................................ 23
3-4. CD Mechanism Deck (MG-101CF-188) ............ 23
3-5. Connection Cable (Automobile) (
3-5. Connection Cable (Automobile) (
3-6. MAIN
.................................. 25
3-7. Antenna BT (BT1) ............................. 25
TEST MODE
.............................. 25
5-1. Block Diagram - SERVO/BT/USB Section - ......... 26
5-2. Block Diagram - MAIN Section - .................. 27
5-3. Block
5-2. Block Diagram - MAIN Section - .................. 27
5-3. Block
- PANEL/POWER SUPPLY Section - .............. 28
Wiring
- MAIN Section (1/2) (Type11: GS610BT only) -..... 30
Wiring
- MAIN Section (2/2) (Type11: GS610BT only) -..... 31
Wiring
- MAIN Section (1/2) (Type31) - .................. 32
Wiring
- MAIN Section (2/2) (Type31) - .................. 33
5-8. Schematic Diagram - MAIN Section (1/4) - .......... 34
5-9. Schematic Diagram - MAIN Section (2/4) - .......... 35
5-10. Schematic Diagram - MAIN Section (3/4) - .......... 36
5-11. Schematic Diagram - MAIN Section (4/4) - .......... 37
5-9. Schematic Diagram - MAIN Section (2/4) - .......... 35
5-10. Schematic Diagram - MAIN Section (3/4) - .......... 36
5-11. Schematic Diagram - MAIN Section (4/4) - .......... 37
EXPLODED VIEWS
6-1. Sub Panel Section .............................. 47
6-2. Chassis
6-2. Chassis
................................ 48
ELECTRICAL PARTS LIST
Accessories are given in the last of the electrical parts list.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
If the optical pick-up block is defective, please replace the whole
optical pick-up block.
Never turn the semi-fi xed resistor located at the side of optical
pick-up block.
optical pick-up block.
Never turn the semi-fi xed resistor located at the side of optical
pick-up block.
semi-fixed resistor
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
4
DESTINATION SETTING METHOD
When the complete MAIN board or IC502 on the MAIN board is
replaced, the destination setting is necessary.
When the complete MAIN board or IC502 on the MAIN board is
replaced, the destination setting is necessary.
1. Destination Setting
Set destination according to the procedure below.
Set destination according to the procedure below.
1-1. Setting the Destination Code
1. In the state of source off (the clock is displayed), enter the test
1. In the state of source off (the clock is displayed), enter the test
mode by pressing the buttons in order of the [ 4] t [MIC
5] t [PAUSE 6] (press only the [PAUSE 6] button for two
2. In the state in which the software main version is displayed on
the liquid crystal display (refer to following fi gure), enter the
destination setting mode by pressing the buttons in order of the
[
destination setting mode by pressing the buttons in order of the
[
SEEK+] t [SEEK–
] t [PUSH ENTER/
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
3. Input the alphanumeric character of 12 digits of “F XXXXXX”
displayed on the liquid crystal display, and execute the destina-
tion setting.
tion setting.
Note: Refer to following “1-3. Entering the Destination Code” for opera-
4. The resetting operation is executed by pressing the [
OFF
SRC] button for 1 second after the setting ends, and the unit
returns to the normal condition.
returns to the normal condition.
1-2. Display in Destination Setting Mode
(Displayed characters/values in the following fi gure are example)
(Displayed characters/values in the following fi gure are example)
12 digits
1-3. Entering the Destination Code
• Method of operation by main unit
• Method of operation by main unit
1. Rotate the control dial, and select the alphanumeric character
2. The digit advances by pressing the [PUSH ENTER/VOICE/
APP] or [
SEEK+] button.
The digit returns by pressing the [MODE ] or [SEEK–
Sony Mex Gs610bt Wiring Diagram
] button.
3. The setting is completed by pressing the [PUSH ENTER/
Sony Mex Xb100bt User Manual
APP] button, and the initialization operation is done.
1. Press the [V] or [v] button, and select the alphanumeric char-
2. The digit advances by pressing the [b] button.
Sony Mex Gs620bt Manual
The digit returns by pressing the [B] button.
3. The setting is completed by pressing the [ENTER] button, and
– Continued on next page –